Vinacomin has successfully applied CFB technology in the thermal power plants
09:29 | 19/07/2017
In CFB boiler the fuel will burnt at a temperature of 760oC – 926oC to prevent nitrogen oxide (NOx) from forming. While burning, flue gas such as sulfur dioxide will be released. At the same time, sulfur-absorbing chemical as limestone will be used to mix with the fuel particles in fluidization phase, which will absorb almost 95% of the sulfur pollutants without the high cost flue-gas desulfurization (FGD) system
Coal used in Cam Pha (2x340 MW) and Mao Khe (2x220 MW) TPPs has a low heat value (coal dust 6a, 6b) and due to a high combustion efficiency, the ash and slag have a low content of non-burned carbon so they are utilized for non-baked bricks an cement additives…, that leads to decreasing area of slag dumping site. Besides, the closed waste water system which allows reusing waste water after treatment also minimizes discharging water into the environment.
To promote these successes, in coming time, Vinacomin will consider developing TPPs with high- efficiency low- emissions (HELE) technology as supercritical (SC) and ultra supercritical (USC) boilers in order to raise efficiency of TPPs and minimize environmental impacts.
VietnamEnergy.vn
